My Blog

Category: ZL1 1LE

  • 2018 Chevrolet Camaro ZL1 1LE – Stage-2 Package

    2018 Chevrolet Camaro ZL1 1LE – Stage-2 Package

     

    Jeff brought us his Arctic Blue Metallic 2018 Chevrolet Camaro ZL1 1LE to get the supercharged LT4 equipped with our Stage-2 package! Modifications below:

    • Roto-Fab, LLC Big Gulp 5.00″ cold-air intake system
    • ZPE G​ripTec 2.31″ upper supercharge pulley & 10-bolt hub
    • Dedicated Motorsports 10mm wider 6061 aluminum tensioner pulley
    • Gates Corporation HD Fleetrunner Micro-V “Green” belt
    • Stainless Works 2.00” primary ID long-tube headers with high-flow catalytic converters
    • Stainless Works Legend Series exhaust system
    • Mightymouse Solutions Mild catch can
    • NGK Spark Plugs LTR7IX-11 spark plugs
    • MSD Performance spark plug wires
    • Design Engineering, Inc. spark plug wire Protect-A-Boot sleeves
    • Design Engineering, Inc. heat shroud applied to oxygen sensor wires
    • All the miscellaneous OEM and aftermarket components to bring it all together
     
     
    With the mechanical work wrapped up in the shop by John, Matt strapped her down to the rollers for a custom calibration by Vlad via HP Tuners. With 93 octane in the tank, and the stock supercharger delivering ~13psi, Vlad increased the LT4’s output to a solid 611.85whp & 664.88lbft! She’s begging for a little ethanol…
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

  • Shock 2020 Chevrolet Camaro ZL1 1LE – NS7 Spec1 Package

    Shock 2020 Chevrolet Camaro ZL1 1LE – NS7 Spec1 Package

    Freddy brought us his gorgeous Shock 2020 Chevrolet Camaro ZL1 1LE with the goal of adding 60-70whp on 93 octane while maintaining stock-like drivability. The solution? Our NS7 Spec1 package! Modifications below:
     
    Pre-existing:
    • Roto-Fab, LLC air-intake system
     
    Performed by us:
    • ZPE GripTec 2.30″ upper pulley
    • Dedicated Motorsports 10mm wider LT4 tensioner pulley
    • Gates Corporation HD Fleetrunner Micro-V “Green” belt
    • Lingenfelter Performance Engineering 160° thermostat
    • Mightymouse Solutions Mild catch can setup
    • NGK Spark Plugs LTR7IX-11 spark plugs
     
    With the mechanical work wrapped up in the shop by Alex, Matt strapped her down to the rollers for Vlad to perform a custom calibration via HP Tuners. The results? 612.51whp & 632.52lbft on 93 octane! Considering these cars normally baseline between 540-550whp on our dynos, this is right in line with our expectations. Solid outcome and killer value for what we consider to be our Stage-1 performance package for these cars.
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
    Reach Out Today To See What We Can Do For You!

     

    Contact Us