Category: S2000

  • 2003 Honda S2000 – Turbo

    One of the best-executed S2000s around is back on the rollers! This insane 2003 Honda S2000 belongs to longtime friend and customer, Aaron, who has carried out every bit of this build himself. From multiple tuning sessions over the past several years, we’ve seen this car develop step-by-step into what it is today — it’s been quite a cool thing to witness, and an honor to be involved in.

    What’s the setup? Forged internal 2.4L F20C with Darton sleeves, ARPfasteners, Supertech valve train, Garrett GTX3076R, TiAL Sport pressure control, Magnus Motorsports intake manifold, custom PTFE surge-tank fuel system featuring Injector Dynamics ID1700X fuel injectors, dual AEM 320lph fuel pumps (surge-tank mounted), Aeromotive Fuel Systems Stealth 340lph in-tank feeder pump, built T56 transmission, 8.8 differential, custom SPEC Clutch twin-disc clutch, all controlled with sensors and Infinity 506 stand-alone engine management system from AEM Performance Electronics, with tons of other details to bring it all together.

    This round, with a tank full of E85, Vlad calibrated the setup for the first time at full boost (~25psi at peak tapering to ~18psi by redline), extracting a strong 590.33whp & 471.10lbft! Definitely a ripping-fast power level for an AP1 chassis.

    Check out the video below!

     

     

     

     

    Reach Out Today To See What We Can Do For You!

  • 2006 Honda S2000 – Supercharged

    2006 Honda S2000 – Supercharged

    2006 Honda s2000

    A customer recently brought us his 2006 Honda S2000 to have it dialed in by Vlad on the dyno. These F20C/F22C engines are already impressive in factory form, but add a little boost into the equation, and they really come alive. National Speed is no stranger to these engines and we were excited to have this great example in our Richmond shop.

    The owner left the powertrain in his gorgeous AP2 mostly stock, but equipped it with a KraftWerks Performance Group supercharger system featuring a Rotrex C38-81, and a Skunk2 Racing exhaust system to let the boosted F22C breathe a bit easier.

    Calibrating via Hondata FlashPro, Vlad was able to extract 428.20whp & 292.97lbft on 93 octane! Overall, a super well-rounded build, that must be an absolute blast to throw through turns!

     
     
     

    Reach Out Today To See What We Can Do For You!

  • 1991 Honda Civic – B18C Swap

     

     

     

    Post-work horsepower and torque: 167.67whp and 126.44ftlbs

    EF Honda Civic, B18C swap with LSD transmission, built for auto cross duty… Go-cart on steroids, anyone? This is one of those fun, simple, yet very effective projects that are always a blast to see come to fruition.

    Modifications performed are as follows;

    – H-Motors Online B18C with OEM LSD transmission
    – Full-Race ProStreet traction bars
    – Competition Clutch Stage-II clutch
    – Competition Clutch lightweight flywheel
    – All fluids replaced with Honda OEM fluid
    – NGK “blue” spark-plug wires
    – NGK BKR7ES-11 spark plugs
    – Honda OEM timing belt and water pump
    – AEM short-ram intake
    – Thermal R&D CL-Type catalytic converter back exhaust system
    – Mishimoto radiator
    – FAL slim fans
    – HASport 70a motor mounts
    – HASport AC bracket
    – HASport cable to hydraulic conversion
    – HASport swap axles
    – HASport shift linkage
    – Boomslang OBD0-ODBI conversion harness
    – P72 ECU socketed for S300
    – Hondata S300

     

     

     

  • 1992 Honda Civic

    1992 Honda Civic – Turbocharger System – Peak Boost/TiAL Sport/Thermal R&D

    o   Peak Boost FTW T3/38mm flanged manifold

    o   Custom National Speed, Inc. 3.00″ 304SS downpipe

    o   Thermal R&D 3.00″ catalytic-converter back exhaust system

    o   Custom National Speed, Inc. 1.50″ 304SS dumptube

    o   Custom National Speed, Inc. 2.50″ polished aluminum hot-side charge piping

    o   Custom National Speed, Inc. 2.50″ polished aluminum cold-side charge piping

    o   Converting to blue 4-ply silicone reinforced couplers with t-bolt clamps

    o   TiAL 50mm blow-off valve (anodized blue to match wastegate)

    o   Custom National Speed, Inc. 1.50″ polished aluminum coolant hard pipes

    o   Coolant hard pipes utilizing 1.50″ blue 4-ply silicone reinforced couplers with t-bolt clamps

    o   Custom National Speed, Inc. polished aluminum coolant-expansion chamber

    o   Brian Crower dual valve springs with steel retainers

    o   K&N intake filter

    o   Custom National Speed, Inc./Z10 Motorsports block and valve cover breather system

    o   Snake skinned grounding cables

    o   AEM UEGO analog wideband gauge

    o   Custom dyno tuning via CROME

     

  • 1991 Honda Civic

    Engine Swap and Engine Breathing Modifications – B18C/Full-Race/HASport/Hondata/Thermal R&D