My Blog

Category: Make

  • 2018 Toyota 4Runner TRD Off-Road – Magnuson TVS1320 Supercharger

    2018 Toyota 4Runner TRD Off-Road – Magnuson TVS1320 Supercharger

     
    Qaise’s 2018 Toyota 4Runner TRD Off-Road came to us as a solid street & trail rig, equipped with Icon Vehicle Dynamics suspension, rock sliders, 285/70R17 Falken Wildpeak A/T3W E-load tires, and other high-quality components. But it was missing one big thing: MORE POWER! And that’s exactly what our Stage-1 supercharger package brings to the underwhelming 4.0L 1GR-FE, featuring the Magnuson Superchargers Roller Rocker TVS1320 supercharger system.
     

    With the mechanical work wrapped up in the shop by Mike, John strapped her down to the rollers for post-work dyno pulls. With the Magnuson TVS1320 delivering ~6psi, output was increased to a nice square 306.15whp & 305.60lbft — a gain of 70whp & 45lbft at peak over the baseline of 236.92whp & 251.28lbft, with over 70lbft picked up in the mid range! That’ll definitely give Qaise’s 4Runner more usable performance for both the daily commute and the weekend trail runs.

     
     
     
     
     
     

  • 2018 Chevrolet Camaro ZL1 – 600whp Track Toy

    2018 Chevrolet Camaro ZL1 – 600whp Track Toy

     

    John brought us his 2018 Chevrolet Camaro ZL1 to get the supercharged LT4 exhaling a bit easier on the road course! Modifications performed by us below:

    • Stainless Works 2.00” primary ID long-tube headers with high-flow catalytic converters
    • CORSA Performance Xtreme exhaust system
    • NGK Spark Plugs LTR7IX-11 spark plugs
    • MSD Performance spark plug wires
    • Design Engineering, Inc. spark plug wire Protect-A-Boot sleeves
    • Design Engineering, Inc. heat shroud applied to oxygen sensor wires
    • All the miscellaneous OEM and aftermarket components to bring it all together
    With the mechanical work wrapped up in the shop by Michael, John strapped her down to the rollers for a custom calibration by Vlad via HP Tuners. With 93 octane in the tank, Vlad increased the LT4’s output to 599.01whp & 633.93lbft!
     

     
     
     
     
     

  • 2017 Dodge Challenger R/T – Whipple 3.0L Supercharger Package

    2017 Dodge Challenger R/T – Whipple 3.0L Supercharger Package

     

    Jerry brought us his 2017 Dodge Challenger R/T to have the 5.7L Hemi set up with our Stage-1 Whipple 3.0L package! Work performed by us below:

    • Whipple Superchargers Gen-V 3.0L W185RF twin-screw supercharger system
    • NGK Spark Plugs LZTR7AIX-11 spark plugs
    • JLT Performance air-intake system
    • JLT Performance air-oil separator
    • MSD Performance fuel pump voltage booster
    • MotoRad 180° thermostat
    • Holley Sniper aluminum valve covers
    • National Speed in-house ECU/PCM unlocking service
    • All the miscellaneous OEM and aftermarket components to bring it all together

    With the mechanical work wrapped up in the shop by Jerzy, John strapped her down to the rollers for a custom calibration by Vlad via HP Tuners. With 93 octane in the tank, and the Whipple 3.0L delivering ~7psi of boost, output increased to 516.85whp & 485.75lbft!

     

     
     
     
     
     
     
     
     
     
     
     
     
     
     

  • 2020 Chevrolet Corvette Stingray – Lowering Springs

    2020 Chevrolet Corvette Stingray – Lowering Springs

     
    Christopher brought his 2020 Chevrolet Corvette Stingray back into the shop for its second round of work to get the suspension sitting right!

    Modifications performed by us below:

    • Paragon Performance 1.00″ lowering springs produced by Hyperco
    • Paragon Performance rear lowering collars
    With the new suspension dialed in and a fresh alignment performed, Christopher’s C8 looks better than ever, with the upgraded handling to boot!

     
     
     
     
     
     
     
     
     
     

  • 2013 Jeep Grand Cherokee SRT8 – Camshaft & Head Work

    2013 Jeep Grand Cherokee SRT8 – Camshaft & Head Work

     
    Dennis brought us his Whipple supercharged 2013 Jeep Grand Cherokee SRT8 to add a ground-pounding idle and get the 6.4L Hemi making safe power with less boost! Build details below:

    Performed by us:
    • COMP Cams Stage-2 camshaft
    • COMP Cams phase limiter
    • COMP Cams valve seats, valve seals, valve springs, valve retainers & locks
    • Manley Performance Products, Inc. chromoly pushrods
    • MDS delete utilizing OEM Mopar components
    • OEM Hellcat lifters
    • OEM Hellcat engine oil pump
    • NGK Spark Plugs LZTR6AIX-13 spark plugs
    • MotoRad 180° thermostat
    • All the miscellaneous OEM and aftermarket odds-and-ends to bring it all together.
    Pre-existing modifications:
    • Whipple Superchargers 2.9L W175FF twin-screw supercharger system
    • Whipple Superchargers 3.25″ upper supercharger pulley
    • MSD Performance fuel pump voltage booster
    • Kooks Headers and Exhaust long-tube headers with high-flow catalytic converters
     
    With the mechanical work wrapped up in the shop by Dom, John strapped her down to the rollers for Vlad to perform a custom calibration via HP Tuners. With 93 octane in the tank, Vlad increased the 6.4L Hemi’s output to 639.52whp & 533.48lbft! Perfectly safe power for the stock bottom end, with less boost pressure, and that ground-pounding idle Dennis was after!

     
     
     
     
     
     
     
     
     
     

  • 2018 Chevrolet Camaro ZL1 1LE – Stage-2 Package

    2018 Chevrolet Camaro ZL1 1LE – Stage-2 Package

     

    Jeff brought us his Arctic Blue Metallic 2018 Chevrolet Camaro ZL1 1LE to get the supercharged LT4 equipped with our Stage-2 package! Modifications below:

    • Roto-Fab, LLC Big Gulp 5.00″ cold-air intake system
    • ZPE G​ripTec 2.31″ upper supercharge pulley & 10-bolt hub
    • Dedicated Motorsports 10mm wider 6061 aluminum tensioner pulley
    • Gates Corporation HD Fleetrunner Micro-V “Green” belt
    • Stainless Works 2.00” primary ID long-tube headers with high-flow catalytic converters
    • Stainless Works Legend Series exhaust system
    • Mightymouse Solutions Mild catch can
    • NGK Spark Plugs LTR7IX-11 spark plugs
    • MSD Performance spark plug wires
    • Design Engineering, Inc. spark plug wire Protect-A-Boot sleeves
    • Design Engineering, Inc. heat shroud applied to oxygen sensor wires
    • All the miscellaneous OEM and aftermarket components to bring it all together
     
     
    With the mechanical work wrapped up in the shop by John, Matt strapped her down to the rollers for a custom calibration by Vlad via HP Tuners. With 93 octane in the tank, and the stock supercharger delivering ~13psi, Vlad increased the LT4’s output to a solid 611.85whp & 664.88lbft! She’s begging for a little ethanol…
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

  • 2012 Cadillac CTS-V – Bolt Ons & Tune

    2012 Cadillac CTS-V – Bolt Ons & Tune

     
    Robert brought us his 2012 Cadillac CTS-V Coupe to add some bolt on performance! Modifications performed by us below:

     
    • OEM GM ZL1 supercharger lid milled to clear strut tower brace and hood
    • Dedicated Motorsports reinforced intercooler brick
    • ZPE GripTech 2.50″ upper supercharger pulley
    • Lingenfelter Performance Engineering solid supercharger isolator coupler
    • Gates Corporation HD Fleetrunner Micro-V “Green” belt
    • Injector Dynamics ID105x fuel injectors
    • All the miscellaneous OEM and aftermarket components to bring it all together

     
    With the mechanical work wrapped up in the shop by John, Matt strapped her down to the rollers for a custom calibration by Vlad via HP Tuners. With 93 octane in the tank, and the OEM TVS1900 supercharger delivering ~12psi, Vlad increased the LSA’s output to a solid 566.87whp & 536.03lbft!
     

     
     
     
     
     
     
     
     
     
     
     
     
     
     

  • 2019 Ford F150 SSV – Whipple Supercharged

    2019 Ford F150 SSV – Whipple Supercharged

     
    This one is definitely on our list of ultimate daily drivers! Ryan brought us his 2019 Ford F-150 SSV to get the Gen-III Coyote 5.0L Whipple 3.0L equipped! Modifications below:

    Pre-existing:
    • Gibson Performance Exhaust stainless steel dual exhaust
    First round of modifications performed by us:
    • American Racing Headers 1.825″ ID long-tube headers

    Second round of modifications performed by us:
    • Whipple Superchargers Stage-II 3.0L W185RF twin-screw system
    • Whipple Superchargers billet 132mm throttle body
    • Whipple Superchargers Crusher air-intake system
    • Whipple Superchargers 55 lb-hr fuel injectors
    • Boundary Lubrication Systems billet oil pump gears
    • Boundary Lubrication Systems billet crankshaft sprocket
    • All the miscellaneous OEM and aftermarket components to bring it all together

    With the mechanical work wrapped up in the shop by Jeremy, John strapped her down to the rollers for Vlad to perform a custom calibration via HP Tuners. With 93 octane in the tank and the Whipple 3.0L delivering ~10psi, Vlad increased the Coyote’s output to a solid 674.72whp & 582.55lbft! Needless to say, Ryan’s now having much more fun on the daily commute.
     
     
     
     
     
     
     
     
     
     
     
     
     
    Reach Out Today To See What We Can Do For You!

     

    Contact Us
  • 2017 Ford Mustang Shelby GT350 – Stage-II VMP Supercharged

    2017 Ford Mustang Shelby GT350 – Stage-II VMP Supercharged

     
    Scott brought us his 2017 Ford Mustang Shelby GT350 to get the Voodoo 5.2L set up with our Stage-2 VMP Supercharged package and up to the mid-700whp range! Package includes:
     
    • VMP Performance TVS2650R Odin complete supercharger system
    • VMP Performance 88mm upper supercharger pulley
    • VMP Performance Twinjet twin-69mm throttle body
    • aFe POWER 120mm intake system
    • VMP Performance triple-pass heat exchanger with dual-11.00″ SPAL electric fans
    • Modular Motorsports Racing – MMR billet oil pump gears & crankshaft sprocket
    • Optional Reische Performance 170° thermostat
    • Optional JLT Performance 3.0 air/oil separator
    • NGK Spark Plugs LTR7IX-11 spark plugs
    • Stainless Works Stainless Power 1.875″ primary ID long-tube headers with high-flow catalytic converters
    • Optional Mantic Clutch USA 9000 Series Ceremetallic twin-disc clutch
    • All the miscellaneous OEM Ford gaskets, seals, and components to complete the installation

    With the mechanical work wrapped up by Jerzy in the shop, John strapped her down to the rollers for Vlad to perform a custom calibration via HP Tuners. With 93 octane in the tank, Vlad increased the Voodoo’s output to 750.44whp & 561.45lbft!

     
     
     
     
     
     
     
     
     

  • 2020 Dodge Challenger SRT Hellcat – 800whp

    2020 Dodge Challenger SRT Hellcat – 800whp

    Jacob brought us his 2020 Dodge Challenger SRT Hellcat to break the 800whp mark with our Stage-1+ Package! Modifications below:

    • National Speed In-house ECU/PCM unlocking service
    • HP Tuners SmartAccess cable
    • JLT Performance 125mm air-intake system
    • Metco Motorsports 2.85” upper supercharger pulley
    • TBA Machine 3.00″ dual-bearing supercharger idler pulley
    • TBA Machine 3.00″ supercharger tensioner pulley
    • Gates Corporation HD Fleetrunner Micro-V “Green” belt
    • NGK Spark Plugs LFR7AIX spark plugs
    • Injector Dynamics ID1050x fuel injectors
    • MotoRad 180° thermostat
    • Stainless Works 3.00″ ID mid-pipe with high-flow catalytic converters
    Pre-existing modifications:
    • BWoody Performance cold-air intake system
    • Borla Exhaust exhaust system
    With the mechanical work wrapped in the shop by Dylan, Matt strapped her down to the rollers for Vlad to perform a custom calibration via HP Tuners. With 93 octane in the tank, and the IHI 2.4L supercharger delivering ~15psi, Vlad increased output to 806.50whp & 742.22lbft!