My Blog

Category: WRX

  • 2019 Subaru WRX STI – GTX3076R

    2019 Subaru WRX STI – GTX3076R

    Erick brought his brand new 2019 Subaru WRX STI in to have the wick turned up! Up first in the shop, Alex set the EJ257 up with a Garrett – Advancing Motion GTX3076R Gen-II turbocharger packaged for stock-placement by ATP Turbo, IAG Performance Street Series air/oil separator, PERRIN Performance turbocharger inlet tube, COBB Tuning SF intake system, GrimmSpeed top-mount intercooler, GrimmSpeed 3-port electronic boost control solenoid, GFB blow-off valve, TOMEI unequal-length header & up-pipe, Invidia Exhaust down-pipe & Gemini R400 exhaust system, Aeromotive Fuel Systems 340lph in-tank fuel pump, Injector Dynamics ID1050X fuel injectors, Mishimoto Automotive radiator, all transmitting through an Advanced Clutch Technology HDSS clutch kit & Streetlite flywheel, with all the miscellaneous OEM and aftermarket gaskets, seals, and fluids needed to bring it together.

    Once Alex wrapped the mechanical work in the shop, Matt strapped her down to the rollers for Vlad to perform a calibration via COBB Tuning’s Accessport. The result? 390.42awhp & 363.35lbft on 93 octane at ~20psi! Much more power to enjoy, while still keeping it stock-block safe — all around great outcome!

       

    Reach Out To See What We Can Do For You!
    Contact Us

  • 2019 Subaru WRX STI

    2019 Subaru WRX STI

    Patrick brought us his 2019 Subaru WRX STI to have the wick turned up! This round, Louis installed a Blouch Turbo 20G-XT turbocharger, Invidia Exhaust down-pipe connecting to the existing Invidia Gemini R400 exhaust system, a COBB Tuning Flex Fuel conversion including in-tank fuel pump, Ethanol content sensor and associated fuel lines, fuel pressure sensor, Injector Dynamics ID1050X fuel injectors, COBB Tuning 3-port electronic boost control solenoid, and a COBB Tuning air-oil separator, all working perfectly with the existing Extreme Turbo Systems top-mount intercooler and AEM Intakes air-intake system.

    With the mechanical work wrapped in the shop, Charlie strapped her down to the rollers for Vlad to perform a custom Flex Fuel calibration via COBB Tuning’s Accessport. Starting off with 93 octane, Vlad increased the EJ257’s output to 346.07awhp & 327.53lbft. Then with E85 in the tank, Vlad increased output to a repeatable 385.32awhp & 358.11lbft, with a best run of 400.85awhp & 368.94lbft — solid outcome all around on all fuel types!  Video Below. 

      
     
     
     
     
     
    Reach Out To See What We Can Do For You!
    Contact Us

  • 2018 Subaru WRX STI – 475HP

    2018 Subaru WRX STI – 475HP

    Conner brought us his 2018 Subaru WRX STI to have the wick turned up! Up first in the shop, John installed a Blouch Turbo 3.0XT-R connecting to the existing Invidia Exhaust 3.00″ turbocharger-back exhaust system, GrimmSpeed up-pipe with provisions for TiAL Sport 38mm wastegate, TOMEI unequal-length header, PERRIN Performance turbocharger inlet tube, COBB Tuning SF air-intake system, Extreme Turbo Systems front-mount intercooler, COBB Tuning fuel pressure regulator (remedies 2,800rpm stumble), Fuel Injector Clinic 1200cc fuel injectors, all topped off with an IAG Performance Street air/oil separator.

    With the mechanical work wrapped in the shop, Matt strapped her down to the rollers for Vlad to perform a custom calibration via COBB Tuning‘s Accessport. With the 3.0XT-R delivering 18psi, Vlad increased in the EJ257’s output to 404.21awhp & 357.14lbft on 93 octane! Plenty of headroom left with the existing combination, but on 93 octane, Vlad decided to stop at this output level with the stock-bottom-end in mind. Solid performance that Conner is sure to enjoy daily!

      

    Reach Out To See What We Can Do For You!
    Contact Us

  • 2015 Subaru WRX STI – IAG Shortblock

    2015 Subaru WRX STI – IAG Shortblock

    Steve brought his 2015 Subaru WRX STI back in for the next round of work! First round, Steve came in with a goal of a super-responsive 400awhp & 400lbft on pump gas, while also laying the groundwork for more power down the line if (when) he wanted.

    With his end goal of 500awhp+ in mind, Steve jumped straight to an IAG Performance Stage 2.5 Closed Deck short block, along with all the necessary supporting modifications for the immediate and future goals, including Garrett – Advancing Motion GTX2867R Gen-II turbocharger packaged for stock-placement by ATP Turbo, TiAL Sport MV-R wastegate, IAG Performance Street Series air/oil separator, PERRIN Performance turbocharger inlet tube, COBB Tuning SF intake system, Process West top-mount intercooler, COBB Tuning down-pipe, ARP cylinder head studs, JE Pistons Pro Seal cylinder head gaskets, AEM Performance Electronics 320lph in-tank fuel pump, Injector Dynamics ID1050X fuel injectors, all transmitting through an Advanced Clutch Technology HDSS clutch kit & Streetlite flywheel, with all the miscellaneous OEM and aftermarket gaskets, seals, and fluids needed to bring it together, all dialed in with a custom dyno calibration by Vlad via COBB Tuning’s Accessport, resulting in 400.96awhp & 412.29lbft!

    After a few months ripping around at 400awhp/400lbft, Steve started getting the itch for more power. Willing to make some sacrifice on response for more top-end performance, he opted to upgrade to an ATP Turbo packaged stock-placement Garrett GTX3076R Gen-II turbocharger, along with a Killer B Motorsport equal-length header and up-pipe. Once Alex wrapped the mechanical work in the shop, Matt strapped her down to the rollers for Vlad to perform a recalibration via COBB Tuning’s Accessport. The result? 456.91awhp & 443.19lbft on 93 octane, picking up 55.95awhp & 30.90lbft at peak, and ~100awhp & 75lbft in the top-end! While low-end and responsiveness did take a hit as expected, Steve reported that the increase in top-end performance was well worth the sacrifice!

    Up next, Steve will be making the switch to Flex Fuel, and gunning for his end goal of 500awhp+! Stay tuned for more to come from this STI.

     

     

    Reach Out To See What We Can Do For You!
    Contact Us

  • 2004 Subaru WRX – EJ207 Swap

    2004 Subaru WRX – EJ207 Swap

    After several years of solid service, the original EJ205 engine in Johnathan’s 2004 Subaru WRX suffered bearing failure. But rather than restarting with an EJ205-based build, Johnathan decided to take a different route: EJ207 engine swap from the JDM Version 7 Subaru WRX STi! What’s so great about that engine? Out-of-the-box 8,000RPM+ redline, semi-closed deck block, AVCS intake camshafts, IHI VF30 turbocharger good for 300awhp+, and proven resilience to over 500awhp on stock internals — one seriously fun package!

    Once we had the imported engine in-shop from J-Spec Auto Sports Inc., John removed the damaged EJ205 engine and transferred the reusable performance parts to the EJ207 engine, along with a new EXEDY USAclutch & Fidanza Performance 9.5lb aluminum flywheel. and performed the necessary wiring modifications to enable AVCS. Next, it’s time for the final installation, first startup, and then she’s hitting the rollers to get dialed in by Vlad via EcuFlash. Stay tuned for results!

     

    Reach Out To See What We Can Do For You!
    Contact Us

  • 2008 Subaru WRX STI

    2008 Subaru WRX STI

    After experiencing bearing failure, Jason brought his 2008 Subaru WRX STI in to not only get the EJ257 rumbling again, but to also lay the foundation for future modifications! After disassembling the engine to determine the full extent of damage, we discovered that Jason’s quick response to the early signs of bearing failure paid off — the VF48 turbocharger, camshafts, cylinder heads, and AVCS components were all in perfect, reusable shape (not always the case after a bearing failure).

    From there, Jared got to reassembling the engine around an IAG Performance Stage-1 short block, including Killer B Motorsport Ultimate oil pickup tube, ARP 2000-series cylinder head studs, IAG Street Series air-oil separator, GDT cylinder No. 4 cooling modification, COBB Tuning turbocharger inlet mated to the existing SF intake system, GrimmSpeed 3-port electronic boost control solenoid, with all the OEM Subaru pumps, gaskets, seals, and miscellaneous components to bring it all together, with an Advanced Clutch Technology Streetlite flywheel & HDSS clutch kit transmitting the power.

    With the mechanical work wrapped in the shop, Matt strapped her down to the rollers for Vlad to perform a custom calibration via COBB Tuning’s Accessport. Even with 99° ambient air temperature, and a tapped-out stock STI intercooler, Vlad was able to increase output to 309.54whp & 352.06lbft on 93 octane!

    With the foundational work out of the way, Jason’s in great shape for turbocharger, intercooler, and exhaust upgrades down the line to get up to that 400awhp power range.

    Reach Out To See What We Can Do For You!
    Contact Us

  • 2019 Subaru WRX STI

    2019 Subaru WRX STI

    Before the first oil change was even due, Justin brought his 2019 Subaru WRX STI in for the first round of work! Starting out in the shop, Louis set the EJ257 up with a COBB Tuning SF intake system, turbocharger inlet tube, down-pipe, 3-port electronic boost control solenoid, complete Flex Fuel conversion kit with pressure sensor, Injector Dynamics ID1050X fuel injectors, GrimmSpeed up-pipe, and a PERRIN Performance recirculating blow-off valve.

    Up next, she hit the rollers for a Flex Fuel calibration by Vlad via COBB Tuning‘s Accessport! With the stock short block still in place, Vlad proceeded cautiously on both 93 & E85 calibrations to keep the torque in check — resulting in 93 octane output of 312.12awhp & 329.77lbft, and E85 output of 325.70awhp & 360.89lbft! Solid results for the first round of work!

    Reach Out Today To See What We Can Do For You!
    Contact Us

  • 2018 Subaru WRX STI

    2018 Subaru WRX STI

    Rene’s 2018 Subaru WRX STI is in to have the groundwork laid for more (reliable) power! Up first, Louis is giving the EJ257 some attention in the form of an IAG Performance Stage-2.5 short block, ARP cylinder head studs, and IAG air/oil separator. This was all brought together with OEM Subaru gaskets & seals, COBB Tuning down-pipe & catalytic-converter-back exhaust system, COBB Tuning SF air intake & airbox, all transmitting through an Advanced Clutch Technology HDSS clutch & Streetlite flywheel.

    Once the mechanical work is wrapped in the shop, this Subaru WRX STI is hitting the rollers to get dialed in by Vlad via COBB Tuning’s Accessport. Stay tuned for results!

    Reach Out To See What We Can Do For You!
    Contact Us

  • 2013 Subaru WRX STI

    2013 Subaru WRX STI

    Daniel brought his Plasma Blue Pearl 2013 Subaru WRX STI in to have the wick turned up! First up, John is setting the EJ257 up with a list of parts including a Forced Performance Turbochargers FP Green HTZ turbocharger, PERRIN Performance turbocharger inlet, IAG Performance air/oil separator, Process West top-mount intercooler, Modern Automotive Performance down-pipe with high-flow catalytic converter, COBB Tuning fuel rail & line setup, Injector Dynamics ID1050X fuel injectors, AEM Performance Electronics 320lph in-tank fuel pump, all transmitted through Advanced Clutch Technology HDSS clutch & Streetlite flywheel setup. Once the mechanical work is wrapped, she’s hitting the rollers to get dialed in by Vlad via COBB Tuning’s Accessport.

    Stay tuned for results!

     

    Reach Out Today To See What We Can Do For You!
    Contact Us

  • 2004 Subaru WRX

    This WRX came to us with some much needed grip in the powertrain area.

     

    We installed:
    ACT Heavy Duty Clutch Kit

    ACT Streetlite Flywheel 

     

    This setup will ensure that the Subaru puts all the power down!