My Blog

Tag: Corvette

  • 2015 Chevrolet Corvette Z06 | Magnuson Supercharger | Gwatney Heads & Cam | 875WHP

    2015 Chevrolet Corvette Z06 | Magnuson Supercharger | Gwatney Heads & Cam | 875WHP

     

    In 1963, the first track-oriented Corvette Z06 was released to the world. 59 years and seven generations later, the Z06 continues to be an icon in the Chevy lineup. Already a beast from the factory, Andy decided to squeeze even more performance out of his 2015 Corvette Z06. We think the results speak for themselves.

    Modifications performed below: 

    Magnuson Superchargers Magnuson TVS2650R supercharger
    Gwatney Performance ported cylinder heads
    Gwatney Performance PD3 camshaft
    Kooks Headers long-tube headers
    Afe Power aFe Momentum Pro 5R air-intake system
    Mantic Clutch USA Mantic Clutch 9000 Series
    In house calibration performed by Vlad

     
    Results… 875WHP!
     

  • 2018 Chevrolet Corvette Stingray | Stage-1 | A&A Supercharged

    2018 Chevrolet Corvette Stingray | Stage-1 | A&A Supercharged

    Lee brought in his 2018 Corvette Stingray to have our Stage-1 A&A Supercharger Package installed!
    Modifications below:
     
    – A&A Corvette Performance V3 Si Supercharger System
    – Stainless Works Long Tube Headers with X-Pipe and High Flow Cats
    – Mightymouse Solutions Catch Can
    – Hinson Motorsports, Inc Spark Plug Wires
    – DEI Protect-A-Boot Sleeves
    – OEM seals and gaskets
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
    With the mechanical portion wrapped up in the shop by Alex, Matt strapped her down to the rollers for a custom calibration by Vlad via HP Tuners. On 93 octane, Vlad was able to increase the output to 588.18whp & 569.90wtq!
     

  • 2016 Chevrolet Corvette Stingray – A&A Supercharged

    2016 Chevrolet Corvette Stingray – A&A Supercharged

     

    Jamie brought us his 2016 Chevrolet Corvette Stingray to add some safe forced-inducted power to the stock bottom end LT1! Modifications performed below:

    • A&A Corvette Performance Vortech V3 Si complete supercharger system
    • A&A Corvette Performance 8-rib 3.80″ upper supercharger pulley
    • A&A Corvette Performance 8-rib 7​.650″ lower supercharger pulley
    • Innovators West, Inc. harmonic balancer
    • Gates Corporation HD Fleetrunner Micro-V “Green” belt
    • A&A Corvette Performance H​orizontal-mount intercooler system
    • Turbosmart 38mm recirculated blow-off valve
    • Mightymouse Solutions Mild catch can setup
    • Gwatney Performance Innovations CNC ported cylinder heads
    • Brian Tooley Racing dual valve spring kit
    • Brian Tooley Racing push rods
    • Brian Tooley Racing trunnion roller upgrade
    • OEM GMPP Corvette C5.R/C6.R/C7.R timing chain
    • COMP Cams camshaft phaser lockout
    • ARP Pro Series cylinder head studs
    • OEM GM engine oil pump
    • Stainless Works 2.00″ primary ID long-tube headers with high-flow catalytic converters
    • NGK Spark Plugs LTR7IX-11spark plugs
    • MSD Performance 8.50mm spark plug wires
    • Design Engineering, Inc. Protect-A-Boot sleeves
    • All the miscellaneous OEM and aftermarket components to bring it all together
    With the mechanical work wrapped up in the shop by Dom, John strapped her down to the rollers for a custom calibration by Vlad via HP Tuners. With 93 octane in the tank, and the Vortech V3 Si supercharger delivering ~7psi, Vlad increased the LT1’s output to a stock bottom end safe 698.45whp & 633.51lbft! These cars absolutely rip at this output!

     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     

  • 2020 Chevrolet Corvette Stingray – Lowering Springs

    2020 Chevrolet Corvette Stingray – Lowering Springs

     
    Christopher brought his 2020 Chevrolet Corvette Stingray back into the shop for its second round of work to get the suspension sitting right!

    Modifications performed by us below:

    • Paragon Performance 1.00″ lowering springs produced by Hyperco
    • Paragon Performance rear lowering collars
    With the new suspension dialed in and a fresh alignment performed, Christopher’s C8 looks better than ever, with the upgraded handling to boot!

     
     
     
     
     
     
     
     
     
     

  • Christopher’s C8 Corvette Stingray

    Christopher’s C8 Corvette Stingray

     As car enthusiasts, we customize nearly everything we can get our hands on. From cars and beyond, the passion to personalize and make something reflect who you are lives through us no matter the passion. 

    We see each car that we work on as a piece of art. Perfectly tailored for the owner’s needs and dreams. It was with this thought that we decided to start a new way to bring that National Speed personalization to our community; Wallpaper Wednesday. 

    Each Wednesday, we’ll be sharing a custom National Speed Wallpaper for both desktop and mobile, and easily downloaded below! Just right-click and “Save As”, or hold to save on mobile, to get these images saved and posted up as wallpapers on your phone or computer.

    This week, we’re featuring Christopher’s AWE Exhaust-equipped 2020 Chevrolet C8 Corvette Stingray, aptly personalized “prec8 it”. 

     

    Chevrolet C8 Corvette Stingray

     

    The AWE Tuning Touring Exhaust really brings the LT2 exhaust note to a new level, creating a roar from what was once a grumble. 

    Download the desktop and mobile wallpapers here and stay tuned for next week’s Wallpaper Wednesday.