My Blog

Category: Dodge

  • 2019 Dodge Charger R/T Scat Pack – Whipple Supercharged

    2019 Dodge Charger R/T Scat Pack – Whipple Supercharged

    Hadriann brought us his 2019 Dodge Charger R/T Scat Pack to get the 6.4L Hemi Whipple supercharged and over the 600whp mark! Modifications performed by us below:
     
    • Whipple Superchargers Stage-II 2.9L W175AX twin-screw system
    • Whipple Superchargers upgraded air-intake system
    • DeatschWerks 65lb fuel injectors
    • MSD Performance fuel pump voltage booster
    • MotoRad 180° thermostat
    • NGK Spark Plugs LZTR7AIX spark plugs
    • JLT Performance air-oil separator
    • HP Tuners unlocked ECU
    • All the miscellaneous OEM and aftermarket components to bring it all together
     
    With the mechanical work wrapped up, John strapped her down to the rollers for Vlad to perform a custom calibration via HP Tuners. With the Whipple 2.9L delivering ~9psi, Vlad increased the 392’s output to a solid 642.38whp & 587.06lbft!
     
     
     
     
     
     
     
     
    Reach Out Today To See What We Can Do For You!

     

    Contact Us
  • 2011 Dodge Challenger R/T – Camshaft

    2011 Dodge Challenger R/T – Camshaft

     
    Tyler brought us his 2011 Dodge Challenger R/T for a camshaft, bolt-ons, and a custom calibration by Vlad via HP Tuners! Modifications performed below:
     
    • JLT Performance air-intake system
    • Stainless Works 1.825″ primary ID long-tube headers
    • Cam Motion custom billet-core camshaft
    • COMP Cams phase-limiter kit
    • Manley Performance Products, Inc. pushrods
    • Manley Performance Products, Inc. valve springs
    • NGK Spark Plugs LKR7E spark plugs
    • MotoRad 180° Thermostat
    • OEM Hellcat engine oil pump
    • OEM Hellcat lifters
    • All the miscellaneous OEM and aftermarket components required for installation and delete MDS
     
    With the mechanical work wrapped up in the shop, John strapped her down to the rollers for Vlad to dial in the setup via HP Tuners, resulting in 408.16whp & 413.15lbft on 93 octane through the automatic transmission! Considering these cars normally put down between 310-320whp in factory form, that’s a solid 80-90whp gain.
     
     
     
     
     
     
     
     
     
     
     
     
    Reach Out Today To See What We Can Do For You!

     

    Contact Us
  • 2020 Dodge Charger 392 Scat Pack – 500whp

    2020 Dodge Charger 392 Scat Pack – 500whp

     

    Lamont brought us his 2020 Dodge Charger 392 Scat Pack to have the 6.4L Hemi equipped with our 500whp+ camshaft package! Modifications below:

    Pre-existing:
    • JLT Performance air-intake system
    • Ported OEM intake manifold
    • Fast Man 86mm throttle body
    • 180° thermostat

    Performed by us:
    • COMP Cams camshaft
    • COMP Cams phase-limiter kit
    • COMP Cams pushrods
    • COMP Cams Beehive valve springs
    • COMP Cams valve lock set
    • COMP Cams spring seats
    • COMP Cams positive stop PTFE valve seals
    • OEM Mopar Hellcat lifters
    • OEM Mopar Hellcat engine oil pump
    • OEM Mopar Hellcat fuel injectors
    • MDS delete utilizing OEM Mopar components

    With the mechanical work wrapped up in the shop by John, Matt strapped her down to the rollers for Vlad to perform a custom two-fuel calibration via HP Tuners. Up first with 93 octane in the tank, Vlad increased the 6.4L’s output to 512.52whp & 512.91lbft, and then with E85 in the tank, output increased to a 525.94whp & 530.11lbft! Definitely a solid outcome that Lamont is sure to enjoy.

     
    Reach Out Today To See What We Can Do For You!

     

    Contact Us
  • 2012 Dodge Challenger SRT8 – Whipple Supercharged

    2012 Dodge Challenger SRT8 – Whipple Supercharged

     
    Richard brought us his 2012 Dodge Challenger SRT8 to have the 6.4L Hemi and NAG1 transmission built, Whipple supercharged, and bring the power up to Hellcat levels! Modifications performed below:
     
    • Better Built Performance 6.4L built short block
    • ARP main studs
    • Better Built Performance Big Gas cylinder heads with upgraded PSI 1511 valve springs
    • Better Built Performance custom-built NAG1 transmission
    • ProTorque torque converter
    • Manley Performance Products, Inc. Chromoly pushrods
    • Cam Motion custom billet core VVT camshaft
    • COMP Cams phase-limiter kit
    • OEM Mopar Hellcat engine oil pump
    • OEM Mopar Hellcat lifters
    • OEM Mopar non-MDS block valley plug
    • COMP Cams steel retainer kit
    • Whipple Superchargers Stage-II 2.9L W175AX twin-screw system
    • Whipple Superchargers upgraded air-intake system
    • Whipple Superchargers 3.375″ upper pulley
    • NGK Spark Plugs LZTR7AIX-13 spark plugs
    • Stainless Works long-tube headers
    • MotoRad 180° thermostat
    • MSD Performance fuel pump voltage booster
    • HP Tuners unlocked ECU
    • All the miscellaneous OEM and aftermarket components to bring it all together.
     
    With the mechanical work wrapped up, John strapped her down to the rollers for Vlad to perform a custom calibration via HP Tuners. With the Whipple 2.9L delivering ~12psi, Vlad increased the 392’s output to a repeatable 672.71whp & 588.43lbft! With the boost set to such a conservative level, there is plenty more jam in the jar when Richard is ready!
     

    Reach Out Today To See What We Can Do For You!

     

    Contact Us
  • 2017 Dodge Charger SRT 392 – Whipple Supercharged

    2017 Dodge Charger SRT 392 – Whipple Supercharged

    Jared brought us his 2017 Dodge Charger SRT 392 to get the 6.4L Hemi Whipple supercharged and over the 600whp mark! Modifications performed below:
     
    • Whipple Superchargers Stage-II 2.9L W175AX twin-screw system
    • Whipple Superchargers upgraded air-intake system
    • DeatschWerks 65lb fuel injectors
    • MSD Performance fuel pump voltage booster
    • NGK Spark Plugs LZTR7AIX spark plugs
    • HP Tuners unlocked ECU
    • All the miscellaneous OEM and aftermarket components to bring it all together
     
    With the mechanical work wrapped up, Matt strapped her down to the rollers for Vlad to perform a custom calibration via HP Tuners. With the Whipple 2.9L delivering ~8psi, and a 100% factory exhaust system in place, Vlad increased the 392’s output to a repeatable 611.10whp & 571.81lbft!
     

     
    Reach Out Today To See What We Can Do For You!

     

    Contact Us
  • 2019 Dodge Challenger Hellcat Redeye – 840whp

    2019 Dodge Challenger Hellcat Redeye – 840whp

    Powered by bald eagles, freedom, and hellfire.
    Keith had one goal with his 2019 Dodge Challenger Hellcat Redeye when he brought her to us: Demon crushing power on pump gas. With the goal in mind, we designed a build plan to get it done, and Alex got to executing! Modifications performed below:
     
    • Kong Performance ported OEM IHI 2.7L supercharger and snout
    • VMP Performance 105mm throttle body
    • JLT Performance 125mm air-intake system
    • JLT Performance 3.0 air-oil separator
    • ATI Performance Products 10% overdrive harmonic balancer
    • Kooks Headers and Exhaust 2.00″ primary ID long-tube headers
    • NGK Spark Plugs LFR7AIX spark plugs
     
    From there, Matt strapped her down to the rollers for Vlad to perform a custom calibration via HP Tuners. The results? A goal smashing 840.60whp & 774.60lbft! Keith will definitely have his hands full with the new performance.
     

     
    Reach Out Today To See What We Can Do For You!

     

    Contact Us
  • 2018 Dodge Charger SRT Hellcat – 800whp

    2018 Dodge Charger SRT Hellcat – 800whp

    All the way in from Florida, Samuel brought us his 2018 Dodge Charger SRT Hellcat to get her turned up to 800whp!

    Up first in the shop, John strapped her down for pre-work dyno runs to establish our starting point, coming in at 643.65whp & 616.15lbft. From there, TJ set the supercharged 6.2L HEMI up with an air-intake system from JLT Performance, 2.75″ upper supercharger pulley & billet idler from Metco Motorsports, a Gates HD Fleetrunner Micro-V “Green” serpentine belt, along with a pinned harmonic balancer for extra assurance, a set of 2.00″ primary diameter long-tube headers from Stainless Works, OEM Dodge Demon fuel injectors, and a 180° thermostat from MotoRad.

    With the mechanical work wrapped in the shop, John strapped her back down to the rollers for Vlad to perform a custom calibration via HP Tuners. With 93 octane in the tank, and the IHI 2.4L supercharger delivering 15psi, Vlad increased output to 803.80whp & 751.63lbft — a gain of 160.15whp & 135.48lbft! From there, Samuel picked her up for the long drive home, and has been having a blast back home in Florida!

    Reach Out Today To See What We Can Do For You!
    Contact Us
  • 2016 Dodge Charger SRT Hellcat

    2016 Dodge Charger SRT Hellcat

    Romeo brought us his 2016 Dodge Charger SRT Hellcat for the first round of modifications!

    Up first in the shop, John set the supercharged 6.2L HEMI up with an air-intake system and air-oil separator from JLT Performance, 2.75″ upper supercharger pulley & billet idler from Metco Motorsports, a Gates HD Fleetrunner Micro-V “Green” serpentine belt, a set of 2.00″ primary diameter long-tube headers from Stainless Works, ID1050X fuel injectors from Injector Dynamics, and a 180° thermostat from Mishimoto Automotive.

    With the mechanical work wrapped in the shop, Matt strapped her down to the rollers for Vlad to perform a custom calibration via HP Tuners. The results? With 93 octane in the tank, and the IHI 2.4L supercharger delivering 15psi, Vlad increased output to 787.87whp & 720.11lbft! The extra ~120whp, supercharger whine, and exhaust note should definitely make the daily commute far more interesting.

    Reach Out Today To See What We Can Do For You!

  • 2018 Jeep Grand Cherokee Trackhawk – 800 HP

    2018 Jeep Grand Cherokee Trackhawk – 800 HP

    Martin brought us his daily driven 2018 Jeep Grand Cherokee Trackhawk to get it breathing easier, making more boost, and put on ethanol!

    Up first, Archer removed the supercharger snout for porting by Kong Performance matched to their 112mm throttle body, then once returned, moved on to installing a 2.85″ upper supercharger pulley and billet idler from Metco Motorsports, ID1300x fuel injectors from Injector Dynamics, Boost-a-Pump from Kenne Bell Superchargers, a set of 2.00″ primary OD long-tube headers from Kooks Headers and Exhaust, 180° thermostat from Mishimoto Automotive, all topped off with a set of Pro-Kit lowering springs from Eibach.

    With the mechanical work wrapped in the shop, John strapped her down to the rollers for Vlad to perform a custom calibration via HP Tuners. Up first with 93 octane in the tank, Vlad increased output to 764.78awhp & 706.84lbft. Then, after a quick change to E85, Vlad dialed in the ethanol calibration, increasing output to 810.29awhp & 744.63lbft! With both calibrations stored on his laptop, Martin can switch back and forth based on his needs using his MPVI2. Martin now has himself one seriously badass daily driver!

    Reach Out Today To See What We Can Do For You!
    Contact Us

  • Indigo Blue 2019 Dodge Charger SRT Hellcat

    Indigo Blue 2019 Dodge Charger SRT Hellcat

    Ethanol in the tank, power stepped up, and dancing shoes on.

    Last round, James brought us his Indigo Blue 2019 Dodge Charger SRT Hellcat for an intake system from JLT Performance, 2.75″ upper supercharger pulley & billet idler from Metco Motorsports, ID1050X fuel injectors from Injector Dynamics, 2.00″ primary OD long-tube headers from Stainless Works, 180° thermostat from Mishimoto Automotive, upper & lower control arms from BMR Suspension, 3.25 geared 9.00″ rear-end conversion from Driveshaft Shop, all brought together with a custom calibration by Vlad via HP Tuners, netting 799.44whp & 726.08lbft on 93 octane.

    This round, James brought her back in to squeeze out more power, and make sure it gets put down. After installing a fuel pump voltage booster from MSD Performance and filling the tank with E85, Vlad got busy dialing in the ethanol calibration. The result? 875.55whp & 810.71lbft! That’s a gain of 76.11whp & 84.63lbft off just fuel alone! Side note, we’d love to see what this setup would do with a ported supercharger, throttle body, and another 1-2psi of boost pressure.

    Then, with the new output dialed in, Alex got her sitting pretty on a drag pack from Carlyle Racing featuring WELD Racing S79 wheels (20×6 front & beadlocked 17×10 rears) with Mickey Thompson Performance Tires & Wheels Street S/S radials. It goes without saying, James’ Hellcat is now one hell of a killer street car!

    Reach Out Today To See What We Can Do For You!
    Contact Us