My Blog

Tag: Chevrolet

  • 2016 Ford Focus RS – Cobb Tuning Redline Carbon Fiber Intake

    2016 Ford Focus RS – Cobb Tuning Redline Carbon Fiber Intake

    Thomas brought us his 2016 Ford Focus RS to turn the wick up on the 2.3L EcoBoost!
     
    Modifications performed below:
    • COBB Tuning Redline carbon fiber air-intake system
    • COBB Tuning sound suppression chamber
    • COBB Tuning rear engine mount
    • Mountune front-mount intercooler
    • Mountune stainless steel brake line set
    • Stainless Works down-pipe with high-flow catalytic converter
    • Radium Engineering dual catch cans
    • Radium Engineering PCV baffle plate
    • Ford Performance short-throw shifter
    • Steeda accelerator pedal spacer
    • NGK Spark Plugs LTR7IX-11 spark plugs
    • Custom carbon fiber replacement steering wheel
     
    With the mechanical work wrapped up in the shop by John, Matt strapped her down to the rollers for Vlad to perform a custom calibration via COBB Tuning Accessport V3. With 93 octane in the tank, and the stock turbocharger producing ~24psi, Vlad increased the output to a solid 346.07whp & 417.74lbft!

  • 2014 Chrysler 300C SRT8 – COMP Cams Stage 2 Install

    2014 Chrysler 300C SRT8 – COMP Cams Stage 2 Install

    Thomas brought us his 2014 Chrysler 300C SRT8 to get the 6.4L Hemi set up with our camshaft package, and address an MDS lifter failure!
     
    Modifications below:
    • COMP Cams Stage-2 HRT 273° camshaft
    • COMP Cams phase-limiter kit
    • COMP Cams pushrods
    • COMP Cams valve seats, valve seals, valve springs, valve retainers & locks
    • MDS delete utilizing OEM Mopar components
    • OEM Hellcat lifters
    • OEM Hellcat engine oil pump
    • NGK Spark Plugs LZTR6AIX-13 spark plugs
    • All the miscellaneous OEM and aftermarket odds-and-ends to bring it all together
     
    With the mechanical work wrapped up in the shop by Dylan, Matt strapped her down to the rollers for Vlad to perform a custom calibration via HP Tuners. With 93 octane in the tank, Vlad increased the 6.4L Hemi’s output to 443.07whp & 460.72lbft through a 100% stock exhaust and intake system!

  • 2007 Chevrolet Corvette – LS3 Long-Block & Magnuson Supercharger Install

    2007 Chevrolet Corvette – LS3 Long-Block & Magnuson Supercharger Install

    After experiencing engine failure, Rick brought us his 2007 Chevrolet Corvette to have the broken LS2 pulled out, a brand new crate LS3 dropped in, and some boost added on top!
     
    Build details below:
    • Chevrolet Performance LS3 long block
    • Magnuson Superchargers TVS2300 jack-shaft supercharger system
    • Magnuson Superchargers 3.600″ upper supercharger pulley
    • Magnuson Superchargers rear cog pulleys
    • COMP Cams Hi-Tech chromoly pushrods
    • Johnson Lifters 2110 hydraulic roller lifters
    • OEM GMPP Corvette C5.R/C6.R/C7.R timing chain
    • Straub Technologies trunnion bearing upgrade
    • PAC Racing Springs dual valve spring set
    • ARP Pro Series cylinder head bolts
    • Melling Performance Parts engine oil pump
    • VMP Performance fuel pump voltage booster
    • Mightymouse Solutions Mild catch can setup
    • NGK Spark Plugs TR6 spark plugs
    • McLeod Clutches RST twin-disc clutch assembly
    • DeWitts Radiator Pro Series radiator with SPAL dual 11″ electric fans
     
    With the mechanical work wrapped up in the shop by Dylan, Matt strapped her down to the rollers for Vlad to perform a custom calibration via HP Tuners. The results? 667.00whp & 632.17lbft on 93 octane on only 11psi! Much more jam left in the jar when Rick is ready for more down the road!

  • 2016 Corvette Z06 – Magnuson TVS2650 Supercharger

    2016 Corvette Z06 – Magnuson TVS2650 Supercharger

    Gary’s 2016 Chevrolet Corvette Z06 is now Magnuson TVS2650R equipped, Flex Fuel enabled, and laying down 800whp! This is the second round of work for this beautiful C7Z, and needless to say, Gary really took it up a notch this go-round!
     
    All worked performed by us below:
    • Magnuson Superchargers TVS2650R supercharger system
    • Magnuson Superchargers 90mm/3.54″ upper supercharger pulley
    • Dedicated Motorsports 10mm wider supercharger idler pulley
    • Gates HD Fleetrunner Micro-V “Green” supercharger belt
    • ATI Performance Products Super Damper with 8.800″/10% overdrive pulley
    • Texas Speed & Performance VVT-1 camshaft with 32% HPFP lobe
    • COMP Cams camshaft phaser lockout
    • OEM GMPP Corvette C5.R/C6.R/C7.R timing chain
    • Cam Motion AFM/DOD block-off plugs
    • Brian Tooley Racing valve spring set
    • Brian Tooley Racing push rods
    • Texas Speed trunnion bearing upgrade
    • OEM GM Gen-IV LSx lifter guides
    • Johnson Lifters 2110 hydraulic roller lifters
    • ARP Pro Series cylinder head bolts
    • aFe POWER Momentum air-intake system
    • Stainless Works 2.00″ primary ID long-tube headers
    • NGK Spark Plugs LTR7IX-11 spark plugs
    • MSD Performance spark plug wires
    • Design Engineering, Inc. spark plug Protect-a-Boots
    • DSX Tuning auxiliary fuel pump system
    • DSX Tuning Flex Fuel conversion
    • Cordes Performance Racing & Sales supercharger expansion tank
    • AFCO Racing heat exchanger
    • Lingenfelter Performance Engineering 160° thermostat
    • Mightymouse Solutions catch can
     
    With the second round of mechanical work wrapped up in the shop by Dylan, John strapped her back down to the rollers for a custom calibration by Vlad via HP Tuners. With ~E70 in the tank, Vlad increased output to 797.52whp & 777.80lbft! And with the TVS2650R only generating ~14psi, there’s MUCH more jam in the jar when Gary gets that itch!

  • 2018 Dodge Charger Daytona – Stage 3 Package

    2018 Dodge Charger Daytona – Stage 3 Package

    William brought us his 2018 Dodge Charger Daytona for our Stage-3 Naturally Aspirated package to get the 5.7L Hemi bumping and breathing better!
     
    Modifications performed by us below:
    • COMP Cams Stage-2 HRT 273° camshaft
    • COMP Cams phase-limiter kit
    • COMP Cams pushrods
    • COMP Cams valve seats, valve seals, valve springs, valve retainers & locks
    • MDS delete utilizing OEM Mopar components
    • OEM Hellcat lifters
    • OEM Hellcat engine oil pump
    • Kooks Headers and Exhaust long-tubes headers with high-flow catalytic converters
    • Kooks Headers and Exhaust exhaust system
    • NGK Spark Plugs LFR6AIX-11 spark plugs
    • MotoRad 180° Thermostat
    • All the miscellaneous OEM and aftermarket odds-and-ends to bring it all together
    • HP Tuners SmartAccess cable
    • In-house Mopar ECU unlocking service
     
    With the mechanical work wrapped up in the shop by Andrew, Matt strapped her down to the rollers for Vlad to perform a custom calibration via HP Tuners. With 93 octane in the tank, Vlad increased the 5.7L Hemi’s output to 433.73whp & 435.02lbft!

  • 2017 Dodge Challenger SRT Hellcat – Stage 1 Package

    2017 Dodge Challenger SRT Hellcat – Stage 1 Package

    Dave brought us his 2017 Dodge Challenger SRT Hellcat to turn the wick up with our Stage-1 Package!
     
    Modifications below:
    • JLT Performance 125mm air-intake system
    • Metco Motorsports 2.85” upper supercharger pulley
    • TBA Machine 3.00″ dual-bearing supercharger idler pulley
    • Gates Corporation HD Fleetrunner Micro-V “Green” belt
    • NGK Spark Plugs LFR7AIX spark plugs
    • Injector Dynamics ID1050x fuel injectors
    • MotoRad 180° thermostat
    • Pinned crankshaft
    • In-house Mopar ECU unlocking service
     
    With the mechanical work wrapped in the shop by John, Matt strapped her down to the rollers for Vlad to perform a custom calibration via HP Tuners. With 93 octane in the tank, and the IHI 2.4L supercharger delivering ~15psi, Vlad increased output to 791.32whp & 711.25lbft!
     
    Considering these cars normally baseline around 650whp on our dynos during the summer, that’s a solid 140whp increase, even with ~95° ambient air temperature!

  • Two A90 Toyota Supras – AMS Performance Alpha 6 Turbocharger Install

    Two A90 Toyota Supras – AMS Performance Alpha 6 Turbocharger Install

    Two A90 Supras under the knife, side-by-side, both receiving the newly released AMS Performance Alpha 6 turbocharger systems, fuel system upgrades, and a long list of supporting modifications! Stay tuned for more to come from each!

  • 2015 Mustang GT – VMP Supercharger

    2015 Mustang GT – VMP Supercharger

    Ahmad brought us his 2015 Ford Mustang GT to get the Gen-II Coyote equipped with our installed Stage-2 VMP Supercharged package, traction modifications, and calibrations for both 93 octane and E85! A proven recipe for 800whp.
     
    Modifications performed below:
    • VMP Performance Odin TVS2650 complete supercharger system
    • VMP Performance Twinjet twin-69mm throttle body
    • aFe POWER 120mm intake system
    • VMP Performance triple-pass heat exchanger with dual-11.00″ SPAL electric fans
    • Modular Motorsports Racing – MMR billet oil pump gears & crankshaft sprocket
    • GESi GSport GEN2 UHO EPA compliant catalytic converters
    • Injector Dynamics ID1050x fuel injectors
    • Fuel-it universal ethanol content sensor
    • JLT Performance 3.0 air/oil separator
    • NGK Spark Plugs LTR7IX-11 spark plugs
    • Steeda Ultimate “Stop The Hop” wheel hop eliminator package
    • McLeod Clutches RXT twin-disc clutch kit
    • Driveshaft Shop 1-piece 3.50″ aluminum driveshaft
    • BMR Suspension driveshaft safety loop
    • All the miscellaneous OEM Ford gaskets, seals, and components to complete the installation
     
    Preexisting modifications:
    • Stainless Works 1.875″ primary ID long-tube headers
     
    With the mechanical work wrapped in the shop by TJ, John strapped her down to the rollers for Vlad to perform a custom calibration via HP Tuners. Results below!
    • Boost: ~12.5psi
    • 93 octane: 740.61whp & 591.79lbft
    • E85: 794.28whp & 615.50lbft
    Solid outcome all around!

  • 2015 Mustang GT – VMP Supercharger

    2015 Mustang GT – VMP Supercharger

    Another VMP Performance supercharged Mustang wrapped up and on the prowl with an extra 300whp+ on tap! This one in particular is Tracey’s gorgeous Deep Impact Blue 2015 Ford Mustang GT, which received our installed VMP Performance Odin supercharger package.
     
    Modifications below:
    • VMP Performance Odin TVS2650 complete supercharger system
    • VMP Performance Twinjet twin-69mm throttle body
    • aFe POWER 120mm intake system
    • VMP Performance triple-pass heat exchanger with dual-11.00″ SPAL electric fans
    • Modular Motorsports Racing – MMR billet oil pump gears & crankshaft sprocket
    • JLT Performance 3.0 air/oil separator
    • NGK Spark Plugs LTR7IX-11 spark plugs
    • All the miscellaneous OEM Ford gaskets, seals, and components to complete the installation
     
    With the mechanical work wrapped up by TJ in the shop, John strapped her down to the rollers for Vlad to perform a custom calibration via HP Tuners. With 93 octane in the tank, Vlad increased the Gen-II Coyote’s output to a strong 686.53whp & 541.32lbft through the 6R80 automatic transmission!
     
    With an initial baseline of 379.67whp & 376.59lbft, that’s a solid increase of 306.86whp & 164.76lbft! Quite impressive, considering this car still has 100% stock exhaust system.
     

  • 2016 Corvette Z06 – TVS2650 Supercharger

    2016 Corvette Z06 – TVS2650 Supercharger

    Gary’s 2016 Chevrolet Corvette Z06 is back in the shop for its next round of work! What’s in store? Camshaft, Magnuson TVS2650, with a goal of 800whp!
     
    Last round, we set this gorgeous C7Z up with the following, resulting in 665.30whp & 752.70lbft:
    • ZPE GripTec 2.40″ upper supercharger pulley
    • Dedicated Motorsports 10mm wider supercharger idler pulley
    • Gates HD Fleetrunner Micro-V “Green” supercharger belt
    • Innovators West, Inc. harmonic balancer
    • DSX Tuning billet aluminum supercharger lid
    • aFe POWER Momentum air-intake system
    • Stainless Works 2.00″ primary ID long-tube headers
    • NGK Spark Plugs LTR7IX-11 spark plugs
    • MSD Performance spark plug wires
    • Design Engineering, Inc. spark plug Protect-a-Boots
    • DSX Tuning auxiliary fuel pump system
    • DSX Tuning Flex Fuel conversion
    • Cordes Performance Racing & Sales supercharger expansion tank
    • AFCO Racing heat exchanger
    • Mightymouse Solutions catch can
    • Custom dyno calibration via HP Tuners
     
    It goes without saying that a little bump stick and the incredible Magnuson TVS2650 supercharger is really going to set this combination off! Stay tuned for results!